陶瓷纖維油石

供應商：
上海金煒五金機械有限公司無錫分公司
價格：
面議
最小起訂量：
1個
地址：
長江路5號東方銀座A-1201
手機：
15861401656
聯系人：
小蔡（請說在中科商務網上看到）
產品編號：
146836557
更新時間：
2019-10-10
發布者IP：

您可能喜歡

產品介紹
用戶評價(0)

詳細說明

　　產品描述

　　日本XEBEC陶瓷纖維油石

The standard Xebec Ceramic Fiber Stone.Excellent polishing performance for material under HRC57.標準型陶瓷纖維油石。對硬度HRC57以下之材料擁有杰出的拋光性能。

　　Features 特性

Through the utilization of aerospace materials (Alumina Fiber Filaments), breakage, cracking, and chipping have been eliminated. High polishing efficiency can be ensured.No clogging. Uniformly fine finishes can be achieved.Thanks to the braided structure of the rod type, high polishing efficiency is possible even with the side, of the tool, and there is no splitting of the tip. (#220 is designed in a two way liner structure)Suitable for fine deburring.Higher polishing efficiency can be achieved by using the Meister Finishi with tools (electric, air, ultrasonic)Coarse grit type made of thick Alumina Fiber Filaments is ideal for removing EDM scales. Only XEBEC can manufacture it.本產品采用最適合研磨的結晶結構,實現了高研磨功效。本品纖維交叉排列,可縱橫向滑動,提高研磨速度及油石強度。本品沙粒不易脫落,研磨工件表面不會有劃痕產生。研磨時幾乎不會有熱度產生,不會造成工件變熱和油石劣化。油石形狀可任意修整,自由改變。

　　Structure 結構

■XEBEC’s innovative Original Structure 首創的結構

No breakage during highe speed rotation!!Thanks to the braided structure, the side of the tool can polish!Polishing performance increases substantially when high-speed polishing becomes with a hand grinder!

Meister Finishi Rod Type StructureMeister Finishi rod type is braided structure of alumina fiber filaments.The structure below φ2mm or equivalent to #220(Gray) is as follows.【Alumina fiber filaments structure】The bundles of alumina fiber filaments cross and set in each other.【Effect】Not easy to break or tear, and longer tool life.Both a side and a tip of the tool can polish .Made of the plate as shown left photo.

■Comparison in Structure and Features with Common Abrasive Stone 與普通油石的比較

XEBEC Meister Finish common abrasive stone

Structure

No breakage No breakage even though it’s only 0.5mm thick and 150mm long. Perfect for polishing on narrow areas such as ribs of plastic molds. Sizes less than 3mm thick are not available as they are easy to break. So polishing narrow areas is impossible.

Superior polishing efficiency

	Since it doesn’t crack, high polishing efficiency can be achived when using it xith ultrasonic, air, electrical tools.
	Due to high ALF contents (up to 85%) high density and continuous cutting edges, superior polishing performance continues.

	As it breaks easily, not suitable for the use with ultrasonic, air, or electrical tools.
	Abrasive grain makes up only 30% total weight.
	Due to grain fall out, grinding performance is unstable and tool life is short

　　No clogging

　　Thanks to the self –sharpening action, it resists clogging. Self-sharpening; ALF gradually cleaves by itself and generates new cutting edges, even though binders are consumed during polishing.

　　New cutting edges are generated after grain fall out.However, abrasive grains clog the blank holes created when the grains fall out .Easily clogged.

　　Uniformed fine finishing

　　Thanks to the even diameter of ALF, surface roughness of the finished surface is superior.

　　Due to the variation of abrasive grains diameters, uniform finishes are difficult to achieve..

　　No chipping

　　Thanks to the continuous ALF, grains do not fall out and no scratching occurs.

　　Scratches are caused on the finished surface by fallen out grains.

　　Usage, Applications 用途及應用范圍

■Usage 用途Ideal for precise polishing of free surfaces, free curves, ribs, bosses, etc., of various forming molds (especially plastic mold).High finishing efficiency can be achieved without clogging, even for metals such as aluminum, copper, gun metal, etc., which clogs with common abrasive stones.Can be used in narrow areas where common abrasive stones cannot be used because of breaking.Use on complex shapes where uniform finishing could not be previously attained.Efficient EDM scales removal.陶瓷纖維油石(俗稱超級油石)系將高純度之陶瓷纖維與熱塑性樹脂結合制造而成,具有高硬度、耐磨耗及不易折斷的特性。除可用于手持研磨外,且適用于氣動、電動往復式研磨機。在超音波振動研磨機上使用,效果最佳。陶瓷纖維油石可在各種不同材質的模具鋼上研磨加工。最適用于一般難研磨加工處,如窄溝壁、溝底、孔、滑痕、肋部及微小精細處。尤其對于放電加工后積碳層的快速去除及拋光效果更佳。

■Applications 應用范圍

Usage	Meister Finish (Stick type) 平板型	Meister Finish (Rod type) 圓棒型
Die and Mold Finishing	Removing EDM scalesPolishing precise areaFinishing ribsFinishing edges, corners[Target]For resin, rubber, die castings etc. (Softer than HRC57)	Removing EDM scalesPolishing precise areasFinishing edges, corners to be roundedFinishing bossesFinishing runners, sprues and sub-gates[Target]For resin, rubber, die castings etc. (Softer than HRC57)
Deburring		Deburring parts for communication and optical instrumentsFine deburring of nozzleDeburring edges of cutting tool blades .Fine deburring after machine processing
Others		For dental molds (2.34)For metal-curving

　　Comparison 對比

■Performance Comparison with Competitors (SS)

The most widely used SS product is “Blue”. (60% of all SS products) Please refer to the line graph.Users of S‘s “Blue” use it to achieve surface roughness shown byThe same degree of surface roughness can be achieved by XEBEC’s “Orange”For the user to achieve this surface roughness using S’s “Blue” would result in the finishing removal rate shown in bar graph;Using XEBEC’s “Orange” would result in bar graph,making it 4 times more efficient in polishing.

　　Use

■Meister Finish (Stick type) 平板型